Battery Charger with USB

(Item number: FB-UC-U003)

Parameter:

Input: AC 100V-240 V, 50/60 Hz

Output: DC 2.8~8.7V MAX 250mA/h

Use Enviroment temperature:0-40 C

Suitable for battery of 250-3000 mAh;

Characteristic:

This charger can not only charge most of phone batteries,but also charge chinese phone directly by USB,more convenient and more useable.

For charging battery,this charger adopt the advanced switching power supply which with high efficient, and adopt the advanced control chip circuit, can check the battery & stop charge automatic when finishing charge,can protect battery better.

And for usb charging,put usb wire between this charger and chinese phone,and it charging.When it finish,it will stop charging and protect the phone.

Instruction :

1. Fix the battery:

First adjust the Charger hardware connector space according to the  distance of battery positive pole plate and negative pole plate, make sure the battery and hardware connector in correct connection , press the TE,and if the CON is ON, it is OK ,Otherwise , Press the changed switch Button,press TE again then the CON is ON, it mean connection is ok.

2.Charge confirmation:

After connecting with the battery well, please connect the charger to the 100-240 V AC power source, it indicating charge when the LED CH is flashing.

Finish charge:

When the CH is OFF completely, the FULL become bright, it mean finished charging and it can be taken off for use.

For usb chargeing,connect charger and chinese phone by use wire,and put the charger to the 100~240V AC power source.It begins to charging safely.

Notice:

1.Indoor use only, please use the firm AC power source jack;

2.Avoid the high temperature, heat and direct sunshine when work;

3.Please cut off the AC power source when not use,

4.For the rechargeable battery use only, forbidden to use for  UN-rechargeable battery